Cantilevers support work surfaces (24"D & 30"D) by fitting into the slotted verticals on CMW panels, as well as, fitting into wall hanger strips affixed to walls.  Cantilevers support the right and left side of work surfaces and can also be used as a center support for longer surfaces.  Cantilevers come with anti-dislodgement tooth and are attached to work surfaces with screws.  Shared Cantilevers support 2 adjacent work surfaces at the seam between surfaces and should be used as center support for all work surfaces 66" and longer.

These brackets are used to support corner worksurfaces at the rear and to support peninsula worksurfaces, when butting to a panel or when mounted directly to wall channels

2 pair of counter support brackets are required for each counter cap.  Screws are used through bracket into bottom of counter cap.  Use on 41" panels only.

13 gauge black steel designed to screw to the underside of work surfaces and counter tops at the point where the two surfaces join for added strength.

Aluminum track will accommodate one cantilever only.  Use to hang CMW and ST9000 components and worksurfaces to reinforced drywall.  Use of toggle anchor and bolts is strongly recommended.

Please Specify Painted or Un-painted

Used to maintain vertical alignment on load-bearing right-angled panel connections.  2-piece kit includes screw.  Can be used on conventional and enhanced panels.  Black Only.

Used to increase panel stability by connecting panels to freestanding furniture.  This bracket is secured to back of free standing furniture and hooks to slotted channel panel.  Can be used on conventional and enhanced panels.  Shipped in parts (left & right).  Black only.

This bracket is used to stabilize work surface supporting end panels to panel or wall channel.  Shipped in pairs (left & right).  Black only.

Used to stabilize the 90 degree connection between the end panel an the work surface when the end panel doesn't meet a panel seam.  Black only.

This clamp is used to secure two side-by-side OEM Cantilevers at the same height to align and level together.

Used to connect the front of a cantilever to an adjacent panel.  Kit includes left and right brackets.  Black only.

Kit includes individual bracket only.  Black only.

Kit includes inner and outer bracket.  Used on the inside of workstation; not visible from outside the workstation.  Black only.

Stamped 13 gauge steel with rolled bottom.  16.25" for 24" deep work surfaces; 22.5 for 30" deep work surfaces.  For use with laminated wood core work surfaces.  DT Color Only

Shipped ready to assemble. Unit includes shelf door, top shelf, shelf ends with anti-dislodgment mechanism and hardware. Painted Flipper door front stows on top of the unit. Lock may be keyed to match pedestals. Assembly instructions included. For use with CMW and OEM panels.

Kit includes top and bottom brackets.  Used for securing panel to concrete or reinforced wall.  Attaches the top and bottom of the panel perpendicular to concrete block or reinforced plaster walls.  Mounting screws that connect the brackets to the panel are included in each package.  Paint Finish.

Steel bottom bar attaches to bottom of CMW raceway frame.  OEM electrical may be attached to bottom bar.  OEM compatible.  Order 1 per raceway.

Spring steel.  Use 2 per raceway frame to hold base covers into frame.  OEM compatible.  Order 2 per raceway.

18 gauge steel painted and unpainted base covers.  OEM compatible.  No provision for duplex receptacles.  Priced per pair.  For Paint Finishes.

STP430 powered base covers are compatible with Steelcase style FP and FPW  powerways in both 3 and 4 circuit applications.  Cutouts for the oversized duplex receptacles are not available.  Priced per pair.

Note: Steelcase outlet cover can be used with STP430 base covers to cover up outlet receptacle holes when not in use.  Paint Finish.

Steel 2W90 degree cover to hide power distribution cable at base of panel at 2W90 degree connection and 3W cover to hide power distribution cable at base of panel at 3W90 degree connection.  Paint to match trim color.  Paint finish.