HM Counter Support Brackets
| | | | Center Bracket |  | | | | End Bracket |  | | | | Mid-End Bracket |
| The Center. End and Mid-End brackets support counter caps. Use the Center Bracket to support 2 adjacent counter caps on a straight-line run. The End supports the end of a counter cap that is the end panel in a run. The Mid-End bracket is used at the end of a counter cap above a 2, 3 or 4-way connector.
Available Colors: DT, MT, LG and LT
see color chart |
Item# | Description | Price | Qty | HMP444.05 | Center Bracket | $ 9.40 | | HMP444.06 | End Bracket | 9.40 | | HMP444.07 | Mid-End Bracket | 8.30 | |
|
|
HM Worksurface Support
Clear Access Panel
 | Support panel has laminate surfaces and 1mm self edge. Attaches under work surface at end or midpoint to provide support support if no full height pedestal or return panel is used. Worksurfaces are fastened to support panel via "L" brackets. Support panel-to panel hardware brackets are attached to rear of support panel and inserted into panel slotted vertical. Kit includes brackets, hardware and one glide.
(See Standard Laminates and Edge Color) |
1mm Self Edge | Access
Depth | Top Depth | Price | Qty | HMU465.2400 | 12" | 23.5" | $187.00 | | HMU465.3000 | 18" | 29.5" | 200.00 | | |
|
code33 |
| |
HM Worksurface Support Bracket
 | These brackets are used to support the front of a hanging worksurface to provide additional support. Return panel width must be the same as the worksurface depth.
DT Color Only Item# | Description | Price | Qty | HMP455.02 | Right & Left Brackets | $ 8.00/Pair | |
|
|
Worksurface Support Cantilevers
 | Cantilevers support worksurfaces (24" D & 30" D) by fitting into the slotted verticals on panels, as well as, fitting into wall hanger strips affixed to walls. Cantilevers support the right and left side of a worksurfaces and can also be used as a center support for longer surfaces. Cantilevers are attached to worksurfaces with screws or with hardware that is included.
Shared Cantilevers support 2 adjacent worksurfaces at the seam between the surfaces and are suggested for use as center support for all worksurfaces 66" and longer. Item# | Description | Dim D | Price | Qty | HMP165.16DT | Cantilever-Pair | 16.25D | $ 42.00/pr | | HMP225.22DT | Cantilever-Pair | 22.50D | 58.00/pr | | | HMP166.16DT | Cantilever-Shared | 16.25D | 30.00/ea | | | HMP226.22DT | Cantilever-Shared | 22.50D | 39.00/ea | | | HMU165.0000 | Extra Support Hardware Kit | 4.20 | | |
|
| code33 |
HM Worksurface Retainer
 | Use HMP461.14GA for 16.25" HM Support Arm and HMP461.20GA HM Support Arm
Item# | Dimensions D | Price | Qty | HMP461.14GA | 16.25D | $ 3.00/ea | | HMP461.20GA | 22.50D | 6.00/ea | | | UNP858.01ZI | retainer screw | (zinc).06/ea | | |
|
| |
HM Worksurface Grommet Kit
 | A Grommet measuring nearly, 2" x 4". Installs easily in an y wood core work surface. Available in Black Only
Item# | Price | Qty | | UNP452.01BK | $ 9.00 | | | |
|
| |
HM Pencil Drawer & Drawer Bearers
 | Pencil drawer is injected molded plastic, 3-compartment front with open storage in back. Drawer Bearer is injected molded plastic-smooth , quiet strong-anti-tip drawer catch. Designed to be compatible with OEM products.
Item# | | Price | Qty | | UNP453.02BK | 2H x 19.9D x 22W | $ 33.60 | | | HMP454.01DT | Drawer Bearer | 12.00/pr | | | HMP857.02ZI | Mounting Screws | .06/ea | | | Pencil Drawer Kit
Kit includes: Drawer (1) Pencil Drawer Bearers (pr) Screws (6) | | HMU453.01DT | | 42.60 ea | | | HMU453.01MT | | 42.60 | |
|
| |
Standard Laminates | | Pionite SE 101-S Black | DT | Nevamir S-6-3T Dove Grey | LT | | Nevamar ST-5280-E Taupe | HT | Formica 837-58 Graphite | MT | | Formica 85763-58 | HF | Formica 932-58 Antique White | LU | | Formica 921 Birch | JT | Wilsonart 7054-60 Wild Cherry | CR | | Nevamir S-6-3T Dove Grey | LG | Wilsonart 7909-60 Fushion Maple | MA | | Pionite SG209 Putty Grey | LN | | |
|
