Solution Provider... 
|
| |
| ||
Herman Miller Action Office Parts
Call for Current Pricing
to view dims click on any image
| Fabric-Covered Panel | Tackable Acoustical- Barrier Panel |
 This structural panel has fabric surfaces, a painted top cap, and adjustable glides. It is UL listed and has a Class A-fire retardant rating except when upholstered with Customers Own Material. |  This structural sound-barrier panel has fabric surfaces, a painted top cap and adjustable glides. The entire panel surface has a Noise-Reduction Coefficient (NRC) Rating of 35. The tackable panel surface above the standard work surface height (approximately 29" form the floor) has an NRC rating of 60 |
| Partial-Glazed Panel | Glazed Panel |
 This non powered, structural panel has an 18" high translucent acrylic insert with a painted frame, a fabric covered lower section, a painted top cap, and adjustable glides.Part # A0165 | This structural panel has a painted frame and top cap, a translucent acrylic insert, and adjustable glides .It can be used as a return panel. Part #A0160 |
| Open Panel Frame | Door Panel |
 This structural panel frame has an opening for communicating and sharing equipment. It has a painted frame and top cap and adjustable glides. The panel cannot be used as a return panel. It is UL listed and has a class A fire retardant rating.Part #A0150 |  This 80" high wide panel has a painted frame and top cap, a glazed side panel. a laminate or veneer door, and adjustable glides. The door can be installed to swing left or right and to open in or out. The door cannot be keyed alike. Electrical wires and voice/data cables cannot be muted through this panelPart #A0190 |
| Carpet Gripper | Wall Fastener |
 These molded plastic grippers fit onto the adjustable glides of frames and panels manufactured after 1998, and provide added stability on carpet. They cannot be used on hard floors. Finish is blackPart# G1190 |  This black panhead fastener attaches to a wall strip to a wall.Part #A0291 |
| Wall Start | Draw Rod |
 This assembly connects a panel to an architectural wall, column, or panel of equal height at a90° angle.Part# A0210 |  This draw rod connects Action Office Series 1 or 2 panels or Co/Struc C-series panels of equal heights in a straight line.Part # A0215 |
| Draw, Rod Change of height | 2-way 90° Connector |
 This draw rod connects Action Office Series 1 or 2 panels or Co/Struc C-series panels of equal heights in a straight line.Part # A0219 |  This connector joins 2 panels of equal or unequal heights at a 90° angle. It has a enameled or fabric surface.Part #A0220 |
| 2-Way 120° Connector | Spacer |
 This connector joins 2 panels of equal or unequal heights at a 120° angle. It has a enameled or fabric surface.Part #A0221 |  This spacer joins 2 panels of equal or unequal heights in a straight line and compensates for dimensional gain in a panel run. It has an enameled or fabric surfaces.Part # A0260 |
| 3-Way 90° Connector | 3-Way 120° Connector |
 This connector joins 3 panels of equal or unequal heights at a 90° angles. It has a enameled or fabric surface.Part #A0230 |  This connector joins 3 panels of equal or unequal heights at a 120° angles. It has a enameled or fabric surface.Part #A0231 |
| Panel Hinge | Finished End |
 This black umber panel hinge connects 2 panels of equal or unequal heights at any angle up to 180°. It has an enameled surface.Part #A0270 |  This cover finishes the exposed end osf a panel or supports a transaction surface at the end of a panel run. It has an enameled surface.Part # A0250 |
| Finished End, Change of Height, Panel/Panel | Finished End, Change of Height, Panel/Connector |
 This cover finishes the exposed end of a panel that joins panels of unequal heights. It is 32" long but can be filed cut to the appropriate length.Part # A0251 |  This cover finishes the exposed end of a connector that joins panels of unequal heights. It 46" long but can be field cut to the appropriate length. Part#A0259 |
| Base Power Entry, Direct Connect 3 Circuit | Base Power Entry, Junction Box 3 Circuit |
 This power entry connects a buildings electrical supply from a wall, floor, or column to the base of a powered panel. It is distributes up to 3 20-amp circuits and includes a 6' cable, which can be field cut to the appropriate length. The power entry plugs directly into the bases electrical harness and uses the same connection point as receptacles.A0322 |  This power entry connects a buildings electrical supply from a wall floor or column to the base of a non powered panel and distributes up to 3 20-amo circuits. It includes an electrical harness, 2 standard side covers with receptacle locations, 2 fillers, a 3-piece end cap trim cover, and a cable connector. Part#A0323 |
Action I | Action II | Action III | Action IV | Action V | Action VI| Action VII | Action VIII
Used Parts Product List | Product Development | Recycling News | Recycling News 2 | Satisfied Clients | Wizard News Directory Of Services & Posture Fit Need Help? E-mail: Problem Solver * Prices shown are subject to change without notice. Credit Cards accepted A copy of your invoice-including shipping fee(s) will be emailed or faxed to you. Orders of less than $10 in product will incur a $4.50 Minimum Order Fee. Oodlesofusedparts.com | WizardOfficeChairs.com | BusinessfurnitureShop.com |
|
| Copyright© Problem Solver 2011 |
